Otterbox Defender Series for Galaxy Nexus

Over my years of reviewing and testing, no other case company has ever been able to  replicate the protective properties of Otterbox’s cases. When I plan on dropping my phone off of a two story building, they’re the only ones with a case I can trust.

That’s why when I got my Galaxy Nexus, I knew that the case I would be getting would be from otterbox. Here’s my scoop.

Design

The case consists of two main parts: an outer silicone skin, and an inner hard plastic shell (with a screen protector built in).

The outer silicone skin has a nice grip and absorbs a majority of the initial shock if you happen to drop the device. It has openings for all ports, so you can attach everything you need without having to ever remove the case. This is a nice feature, although it does add more parts and complexity to the overall design of the case.

The Flaw

The inner shell is the hard layer of protection for the device. It has two parts: a bottom and a top section, which snap around the phone. This is where the only problem with the case is.

A "practically indestructible" case?

The top section is a frame around the screen (with openings for speakers, cameras, lights, etc.) which also has a screen protecter glued in. This means that you need to clean off the screen protector of the case in addition to your phone’s screen and try to get them together before any other dust settles. The only issue with this is that if any dust settles after you’ve snapped it on, good luck getting it off – without breaking it, that is. After my first attempt at putting it together, I noticed a bunch of dust particles under the protector. So I take the case off, but the tiny snaps on the edges that hold the case together aren’t willing to let go. In the end, I need to pry them apart to even get to my phone. This bent the frame a bit. On my second attempt at taking the case off, I tried to use a key in the tiny slots next to the snaps. I ended up cracking the frame, and it still took a good ten minutes for me to get the case off of the device.

Conclusion

Otterbox was always (and most likely will always be) known for it’s super-protective lines of cases. At $50, the materials are not very well-built and are extremely prone to cracking and bending. Although it may protect your device, the case is oddly fragile for its super-hefty title. I can’t say I don’t recommend this case, as the protection it offers is above-par, but I can’t highly recommend it as it is fragile and the plastic materials are prone to breaking and bending.

If you want to pick one up for yourself, click here to be redirected to the Otterbox page.

P.S. Thank you otterbox for sending me this awesome (but fragile) case!

LG env2

I must say, the last phone I had was definitely not the nicest one in the world. and It was SO not the nicest one in the world that I barely used it. Now, all of that has changed. I now have a very nice phone, which is running on verizon. Now, as you can see it’s not an iPhone. And I have a very good reason for that – AT&T. When it comes out for verizon I will have it about instantly. But the phone I got is still a nice phone, when it comes to verizon. As you can see by the title it is the env2. Flip, with an internal and an external display. Full QWERTY keyboard, as well as a keypad on the front. Black, with a funky USB slot (not something I appreciate). The env2 is definitely a cool, affordable phone. I have just pretty much explained it. But something I didn’t mention was the camera. The camera is 2.0 mega pixels, and unlike the original env, is flat with the surface so it now lays flat on a table or hard surface. Also, compared to the original env the env2 is a little bit more square (shorter and wider). Sadly, I don’t have a micro SD card inserted, but of course it does still have some internal memory (I have no idea how much). The speakerphone is average quality, but when using the phone normally (no speakerphone), the quality is great. I can very clearly hear someone talking from across the country. I don’t have a headset, so I wouldn’t know if it changes the sound before it goes through the headset port. Also, the charging ports are completely different. I don’t even know if the charging port on the original env is even a USB port. It is pretty much just a hyped up and prettier env. Below are some visual comparisons from the original env, which happens to be my sister which she has dropped many times, and it still works. Sadly I hear the env2 is not quite as durable (I wonder if they did that on purpose to get more purchases).